CubelaPetarandClaude Opus 5
e7ef29c5d5
The gpu role pinned nvidia-driver-580-server (proprietary kernel modules). Those install and load cleanly on the RTX PRO 6000, but the GPU never initialises: NVRM fails at RmInitAdapter (0x22:0x56:897) and nvidia-smi reports "No devices were found". Blackwell (10de:2bb5) requires the open kernel modules. - defaults/main.yml: nvidia-driver-580-server -> 595-server-open. The "-open" part is the actual fix and is version independent. 595 is the newest -server branch in the 24.04 archive (610 is desktop only); projektplan §5.3 asked for the branch to be re-checked and pinned at install time, which had not happened yet. Caveat noted in the file: 595 ships from multiverse, 580/590 from restricted. - tasks/main.yml: install_recommends: false, keeps nvidia-settings and its GTK chain off a headless server (~65 packages). - manuals/20260714-nvidia-driver-install.md: same command, documents the open-module requirement and the failure signature. - SETUP.md: tick off the completed OS install steps. Verified on phy-z-srv-gpu01: driver 595.71.05, CUDA 13.2, RTX PRO 6000 Blackwell at 00000001:5C:00.0 with 97887MiB visible, no NVRM errors in dmesg, single DKMS version registered. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
24 lines
782 B
Markdown
24 lines
782 B
Markdown
# Setup of Server
|
|
|
|
|
|
## Intro
|
|
|
|
Document all the steps done for the initial generic setup of the server.
|
|
|
|
## Step
|
|
|
|
- [x] Document Server in IT-Glue configurations with all infos: IP address, SN, MAC, Hostname, Set as 'planned', ...
|
|
- [x] Document iLO of the Server in IT-Glue configurations: IP address, SN, MAC, Hostname, ....
|
|
- [x] Document iLO license in TI-Glue under 'Licensing'
|
|
- [x] Label physical server: `phy-z-srv-gpu01`
|
|
- [x] iLO setup: Hostname, snmp (v1 disable, configure v3), license was already inserted,
|
|
- [x] RAID setup of server in BIOS
|
|
- [ ] OS Install
|
|
- [x] new local user (sbxadmin)
|
|
- [x] Hostname
|
|
- [x] Network settings
|
|
- [x] filesystem setup
|
|
- [x] select root password
|
|
- [ ] base hardening (ssh, updaetes,..)
|
|
- [x] remove snap (ubuntu only)
|