Rename phy-z-srv-gpu01 to phy-srv-gpu01; fix share analysis scripts

- rename host/group/folder everywhere to match the server's actual
  hostname and physical label
- share-analysis.ps1: sanitize the output filename prefix — '-Paths "D:"'
  produced 'D:-file-types.csv' and Export-Csv failed with 'path format
  not supported', so no CSVs were written
- share-analysis.ps1: new -FolderDepth so folders can be aggregated at
  D:\Abteilungen\<Share> level, which matches the share layout
- list-shares.ps1: -WithSize walks local paths instead of UNC when run on
  the server itself (UNC was orders of magnitude slower and looked stuck)
  and prints progress every 50k files

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>

CLAUDE.md

@@ -40,13 +40,13 @@ server/<hostname>/          # Host-specific docs, scripts, files
 
 ## Servers
 
-| Hostname         | IP            | Status                          |
+| Hostname         | IP            | Status                             |
-| ---------------- | ------------- | ------------------------------- |
+| ---------------- | ------------- | ---------------------------------- |
-| phy-z-srv-jira   | 192.168.66.41 | configured                      |
+| phy-z-srv-jira   | 192.168.66.41 | configured                         |
-| phy-z-srv-cloud  | 192.168.66.66 | configured (Nextcloud)          |
+| phy-z-srv-cloud  | 192.168.66.66 | configured (Nextcloud)             |
-| phy-z-srv-git    | 192.168.66.67 | configured                      |
+| phy-z-srv-git    | 192.168.66.67 | configured                         |
-| phy-z-dmz-sftp01 | 192.168.99.68 | configured                      |
+| phy-z-dmz-sftp01 | 192.168.99.68 | configured                         |
-| phy-z-srv-gpu01  | 192.168.66.69 | planned — setup is the next task|
+| phy-srv-gpu01    | 192.168.66.69 | in setup — base + GPU driver done  |
 
 ## Conventions
 

SETUP.md

@@ -10,7 +10,7 @@ Document all the steps done for the initial generic setup of the server.
 - [x] Document Server in IT-Glue configurations with all infos: IP address, SN, MAC, Hostname, Set as 'planned', ... 
 - [x] Document iLO of the Server in IT-Glue configurations: IP address, SN, MAC, Hostname, ....
 - [x] Document iLO license in TI-Glue under 'Licensing'
-- [x] Label physical server: `phy-z-srv-gpu01`
+- [x] Label physical server: `phy-srv-gpu01`
 - [x] iLO setup: Hostname, snmp (v1 disable, configure v3), license was already inserted, 
 - [x] RAID setup of server in BIOS
 - [ ] OS Install 

TODO.md

@@ -1,8 +1,8 @@
 # TODO
 
-## phy-z-srv-gpu01
+## phy-srv-gpu01
 
-Per [projektplan](server/phy-z-srv-gpu01/notes/20260710-projektplan.md) (§ references below).
+Per [projektplan](server/phy-srv-gpu01/notes/20260710-projektplan.md) (§ references below).
 Server is delivered; base setup + NVIDIA driver are done (see `SETUP.md`).
 
 ### Blocking the knowledge base (customer conversation)
@@ -32,8 +32,8 @@ Server is delivered; base setup + NVIDIA driver are done (see `SETUP.md`).
 - [ ] TLS: currently plain HTTP on `chat.phytron.local`; retrofit an internal CA
       certificate (AD passwords travel in clear text until then)
 - [ ] Hostname mismatch: server reports `phy-srv-gpu01`, repo/inventory/label use
-      `phy-z-srv-gpu01` — align
+      `phy-srv-gpu01` — align
-- [ ] Finish base hardening in `SETUP.md` (ssh, updates) via `just run phy_z_srv_gpu01`
+- [ ] Finish base hardening in `SETUP.md` (ssh, updates) via `just run phy_srv_gpu01`
 
 ### Done
 

ansible/hosts.ini

@@ -10,5 +10,5 @@ phy-z-srv-git ansible_host=192.168.66.67
 [phy_z_dmz_sftp01]
 phy-z-dmz-sftp01 ansible_host=192.168.99.68
 
-[phy_z_srv_gpu01]
+[phy_srv_gpu01]
-phy-z-srv-gpu01 ansible_host=192.168.66.69
+phy-srv-gpu01 ansible_host=192.168.66.69

ansible/roles/nvidia_gpu/tasks/main.yml

@@ -1,5 +1,5 @@
 ---
-# Automates server/phy-z-srv-gpu01/manuals/20260714-nvidia-driver-install.md
+# Automates server/phy-srv-gpu01/manuals/20260714-nvidia-driver-install.md
 # Requires Docker (geerlingguy.docker) for the container toolkit part.
 
 - name: Check Secure Boot state

ansible/run.yml

@@ -69,7 +69,7 @@
       tags: base
 
 
-- hosts: phy_z_srv_gpu01
+- hosts: phy_srv_gpu01
   become: yes
   vars_files:
     - "group_vars/secrets.yml"

server/phy-srv-gpu01/README.md

@@ -1,11 +1,11 @@
-# phy-z-srv-gpu01
+# phy-srv-gpu01
 
 GPU server for AI/ML workloads. Hardware is ordered/assessed; OS setup and configuration are the next step.
 
 | | |
 | - | - |
 | IP | 192.168.66.69 (planned) |
-| Ansible group | `phy_z_srv_gpu01` |
+| Ansible group | `phy_srv_gpu01` |
 | Status | planned — not yet configured |
 
 ## Hardware

server/phy-srv-gpu01/notes/20260710-projektplan.md

@@ -1,4 +1,4 @@
-# Projektplan — Setup phy-z-srv-gpu01 (LLM-Server mit SMB-Wissensbasis)
+# Projektplan — Setup phy-srv-gpu01 (LLM-Server mit SMB-Wissensbasis)
 
 Date: 2026-07-10 (Stand-Update: 2026-09-03)
 Status: **In Umsetzung** — Server geliefert, Basis-Setup + GPU-Treiber fertig
@@ -144,7 +144,7 @@ und Indexgröße (§2.6).
 
 ### 2.4 Ansible vorbereiten (im Repo, testbar ohne GPU)
 
-- `run.yml`: Play für `phy_z_srv_gpu01` ergänzen
+- `run.yml`: Play für `phy_srv_gpu01` ergänzen
 - Rollen-Skelett unter `ansible/roles/` (Details erst bei Umsetzung):
   - `nvidia_gpu` — Treiber (≥ 580), Container Toolkit, optional MIG, DCGM
   - `cifs_mounts` — ro-Mounts, Credentials aus `group_vars/secrets.yml`
@@ -152,7 +152,7 @@ und Indexgröße (§2.6).
     Embedding-Server, Open WebUI + pgvector, Reverse Proxy (TLS), oikb-Timer
   - Bestehendes nachnutzen: `geerlingguy.security` (Basis-Härtung),
     `geerlingguy.docker`
-- `group_vars/phy_z_srv_gpu01.yml`: nur Overrides (Modellname, VRAM-Quote,
+- `group_vars/phy_srv_gpu01.yml`: nur Overrides (Modellname, VRAM-Quote,
   Share-Liste, LDAP-Parameter)
 - Alles außer GPU-Rolle ist vorab in einer Wegwerf-VM testbar (`just run`-Pfad)
 
@@ -210,7 +210,7 @@ wenn der Vollindex schlechte Treffer liefert.
 
 | Phase | Inhalt | Ergebnis/Abnahme |
 |---|---|---|
-| **1. Basis** (Woche 1) | Rack/Strom (600-W-GPU!), iLO, Firmware, RAID, Ubuntu 24.04 LTS, Eintrag in Ansible-Basis-Setup (Security, Pakete, Nutzer) | `just run phy_z_srv_gpu01` läuft grün |
+| **1. Basis** (Woche 1) | Rack/Strom (600-W-GPU!), iLO, Firmware, RAID, Ubuntu 24.04 LTS, Eintrag in Ansible-Basis-Setup (Security, Pakete, Nutzer) | `just run phy_srv_gpu01` läuft grün |
 | **2. GPU-Stack** (Woche 1–2) | Rolle `nvidia_gpu`: Treiber, Container Toolkit, DCGM; **Burn-in unter Dauerlast** (SM120-Risiken, Deep Dive §1.6); MIG erst mal **aus** | `nvidia-smi` ok, 48 h-Lasttest ohne Reset |
 | **3. Inference** (Woche 2) | vLLM-Container (NVIDIA-Build) mit gewähltem Modell, feste VRAM-Quote, Embedding-Server daneben; Benchmark mit Eval-Set | deutsche Antworten ok, Ziel-Parallelität erreicht |
 | **4. UI + Auth** (Woche 2–3) | Open WebUI + pgvector, LDAP-Login, Reverse Proxy + TLS, vorkonfigurierter „Phytron-Assistent" | Login mit AD-Konto, Chat läuft |

server/phy-srv-gpu01/scripts/list-shares.ps1

@@ -16,8 +16,20 @@
     .\list-shares.ps1
 
 .EXAMPLE
-    # remote, and with size per share (slow on large shares)
+    # with size per share — run this ON the file server, it then walks the local
-    .\list-shares.ps1 -ComputerName Z-FILESERVER -WithSize
+    # paths instead of the UNC paths (far faster). Still minutes to hours on
+    # millions of files; progress is printed every 50k files.
+    .\list-shares.ps1 -WithSize
+
+.NOTES
+    Faster alternative when all shares live under one drive (as on Z-FILESERVER,
+    where everything sits under D:): run share-analysis.ps1 once with a matching
+    folder depth instead of measuring every share separately, e.g.
+
+        .\share-analysis.ps1 -Paths "D:" -FolderDepth 2
+
+    That produces size/count per D:\Abteilungen\<Share> in a single pass over
+    the disk, which is what the share list here maps onto.
 #>
 param(
     [string]$ComputerName = $env:COMPUTERNAME,
@@ -55,13 +67,28 @@ $result = foreach ($sh in $shares) {
 
     $sizeGB = $null; $fileCount = $null
     if ($WithSize) {
-        Write-Host "    measuring size ..." -ForegroundColor DarkGray
+        # Walk the LOCAL path when we are on the server itself — going through
-        try {
+        # the UNC path (\\server\share) routes every single file through the SMB
-            $m = Get-ChildItem -LiteralPath "\\$ComputerName\$($sh.Name)" -Recurse -File -Force -ErrorAction SilentlyContinue |
+        # stack and is slower by orders of magnitude on large shares.
-                 Measure-Object -Property Length -Sum
+        $scanPath = if ($ComputerName -eq $env:COMPUTERNAME -and $sh.Path) {
-            $sizeGB    = [Math]::Round($m.Sum / 1GB, 2)
+            $sh.Path
-            $fileCount = $m.Count
+        } else {
-        } catch { }
+            "\\$ComputerName\$($sh.Name)"
+        }
+
+        $sw = [System.Diagnostics.Stopwatch]::StartNew()
+        $n = 0L; $bytes = 0L
+        Get-ChildItem -LiteralPath $scanPath -Recurse -File -Force -ErrorAction SilentlyContinue |
+            ForEach-Object {
+                $n++; $bytes += $_.Length
+                if ($n % 50000 -eq 0) {
+                    Write-Host ("    ... {0:N0} files, {1:N1} GB ({2:N0}s)" -f $n, ($bytes / 1GB), $sw.Elapsed.TotalSeconds) -ForegroundColor DarkGray
+                }
+            }
+        $sw.Stop()
+        $sizeGB    = [Math]::Round($bytes / 1GB, 2)
+        $fileCount = $n
+        Write-Host ("    {0:N0} files, {1:N1} GB in {2:N0}s" -f $n, ($bytes / 1GB), $sw.Elapsed.TotalSeconds) -ForegroundColor DarkGray
     }
 
     [PSCustomObject]@{

server/phy-srv-gpu01/scripts/share-analysis.ps1

@@ -26,7 +26,11 @@ param(
     [string]$OutDir = (Join-Path (Get-Location) ("share-analysis-" + (Get-Date -Format "yyyyMMdd-HHmmss"))),
 
     # PDFs sampled per share for the text-layer check
-    [int]$PdfSampleSize = 200
+    [int]$PdfSampleSize = 200,
+
+    # How many folder levels to aggregate in the *-toplevel-folders.csv.
+    # 1 = D:\Abteilungen, 2 = D:\Abteilungen\AA (matches the share layout here).
+    [int]$FolderDepth = 1
 )
 
 $ErrorActionPreference = 'Continue'
@@ -80,7 +84,17 @@ function Test-PdfTextLayer {
 # --- per-share pass ----------------------------------------------------------
 
 foreach ($root in $Paths) {
+    # Label used for the output filenames. Must not contain characters that are
+    # illegal in a filename — e.g. -Paths "D:" would otherwise produce
+    # "D:-file-types.csv" and Export-Csv fails with "path format not supported".
     $shareName = ($root.TrimEnd('\') -split '[\\/]')[-1]
+    if (-not $shareName) { $shareName = 'root' }
+    foreach ($c in [System.IO.Path]::GetInvalidFileNameChars()) {
+        $shareName = $shareName.Replace($c, '_')
+    }
+    $shareName = $shareName.TrimEnd('_', '.', ' ')
+    if (-not $shareName) { $shareName = 'root' }
+
     Write-Host "=== Analyzing '$root' ..." -ForegroundColor Cyan
 
     if (-not (Test-Path -LiteralPath $root)) {
@@ -118,9 +132,15 @@ foreach ($root in $Paths) {
             $extStats[$ext].Count++
             $extStats[$ext].Bytes += $_.Length
 
-            # top-level folder relative to the share root
+            # folder relative to the share root, aggregated at -FolderDepth levels
             $rel = $_.FullName.Substring($rootLen).TrimStart('\')
-            $top = if ($rel.Contains('\')) { $rel.Split('\')[0] } else { '(root)' }
+            $parts = $rel.Split('\')
+            if ($parts.Count -le 1) {
+                $top = '(root)'
+            } else {
+                $n = [Math]::Min($FolderDepth, $parts.Count - 1)
+                $top = ($parts[0..($n - 1)] -join '\')
+            }
             if (-not $topStats.ContainsKey($top)) { $topStats[$top] = @{ Count = 0L; Bytes = 0L } }
             $topStats[$top].Count++
             $topStats[$top].Bytes += $_.Length